Used farm machinery in Newmarket for sale

New unused tyres Hub Fitment - Center bore: 161mm, PCD: 6x205mm, Stud size: 20mm Countersunk 1 tyre has a bit of a cut in the tread as shown in the photos however this is not deep and the tire is sound.

Fitted on fixed center rim. Tyre has 99% tread remaining and is sound however has deep scratching on one side. Hub fitment. Center Bore: 140mm, PCD: 8 x 205mm, Stud size: 32mm

New and unused. Will fit most 8 stud trailer axles – please check hub fitment below. Hub fitment – Center Bore: 221mm, PCD: 8 x 275mm, Stud Size: 22mm countersunk.

Fitted with unused Alliance A 380 tyres. 169A8 speed rating - steel belted radial. Designed for wheeled excavators, dumpers, small loaders and heavy agricultural implements like rolls, trailed subsoilers etc. Hub...

Unused tyres on rims. 16 ply rating. Hub Fitment: Center Bore: 281mm, PCD: 10 x 335mm, Stud size: 27mm

New and unused. Hub fitment - Center Bore: 281mm, PCD: 10x335mm, Stud Size: 27mm

New and unused. Will fit most 8 stud trailer axles - please check hub fitment below. Hub fitment - Center Bore: 221mm, PCD: 8 x 275mm, Stud Size: 22mm countersunk.

Disc - tine - disc configuration. Fitted with Pro-Active angle adjustable discs, 12 sprung ST tines and rear DDL packer.  Fitted with hydraulic brakes and rear drawbar. A good frame but needs attention before go...

24' diameter x 8' wide. Fitted with good bearings and wheel scrapers.

Brand new and unused, this is a well put together flail. It has hydraulic offset, rear roller, hammer flails and removable grass rakes. 2m working width. We can also supply 1.8m working width. We don't hold stock...

In excellent condition! Fitted with 5 subsoiling legs with shearbolt protection, 2 rows of sprung angle adjustable discs and rear DD packer. Fitted with new points, shins and wings and in good order throughout. ...

C/w depth wheels Good strong frame. Depth wheel adjusters need freeing off and one is missing a handle. 4m transport width. Serial no: 1328

C/w depth wheels and crumbler roller Also has extra leg brackets to enable using it as a 4 leg machine.

5721 hours and fitted with front linkage. In nice order and fitted with the E23 Powershift gearbox, 30' Camso AG6500 belts, 5 SCVS, PTO, Cat. 4 rear linkage, hydraulic trailer brakes and swinging rear drawbar. Th...

C/w 6 pro lift legs and rear DD packer A very strong cultivator with some good metal. Serial number: 102090101

Fitted with new discs and points. 2 rows of discs with hydraulic depth control, 18 autorest tines, mixing discs and Brock 700mm steel ring packer with swivel scrapers. Serial no: 505

Comes with a linkage mounted drawbar. A good strong cultivator fitted with front discs, 6 subsoiling legs with hydraulic auto reset, 2 rows of drop-out discs and rear 800mm Multipacka. Transport width: 3.75m Ser...

C/w Muthing 1.4m flail mower. Starts runs and drives well - hydrostatic gearbox. The flail runs smoothly and is fitted with scoop flails, height adjustable castor wheels and rear roller. Powered by a 35hp 4 cylin...

Done very little - still paint on the rings! Fitted with 22' C2 Cambridge rings, hydraulic fold and road lighting.2.7m transport width. Serial no: 328809150SP

10 Michel subsoiling legs. 10 subsoiling legs followed by RolMix discs with a 600m packer roller. Good wearing metal. Serial no: 071576