Used farm machinery in Braintree for sale

In good order, to suit Ford 10 Series.

Nearly new take-off tyres! 8/275/221 rear stud pattern, 10/335/281 front stud pattern. To suit John Deere 6130R, 6920, 6930 & similar.

Nearly new take-off tyres! 8/275/221 rear stud pattern, 8/275/221 front stud pattern. To suit John Deere 6R 130 & similar.

A spectacular example with only 1,105 hours! C/w McConnel 075 front loader with 3rd service, rear linkage, pick-up hitch, PTO, 1 single spool, and excellent exterior paintwork. Also fitted with the original 16.9-2...

Useful press! C/w 2 rows of rigid tines with shearbolt protection, hydraulic levelling paddles, and a double DD packer. Was originally a 7.6m double press but has been modified to take hydraulic levelling paddles....

A very nice example and only 3,118 hours! C/w AP cab, linkage, drawbar, PTO, and a double spool. There's some rust on the bodywork in places, but overall it's in good condition. Also fitted with a set of 13.6R38 G...

Unused! C/w boot flails & rear roller. Serial no: B151888.

Ex Lemken Zirkon / Saphir combination drill, has gap for PTO shaft to go through to power harrow, would suit other power harrow combination drills. Comes with 4 subsoiling legs with good wearing metal.

80% tread, good sidewalls.

A nice springtine cultivator! C/w manual adjusting sprung levelling board, followed by 4 rows of sprung tines, another sprung levelling board, and a Crosskill roller.

Good wearing metal. C/w 6 low disturbance legs with Tungsten points, followed by 2 rows of cutaway discs, and a rear 800mm MultiPacker. Serial no: 2093.

C/w rear roller, boot flails, front & rear flaps, and side skids. Serial no: 1724D.

To suit JCB Q-fit headstock. Front edge is fairly worn, and has cracked off at both ends of the bucket.

Wheel-driven mowers, comes with rear rollers. The wheels need freeing-off, and the tyres need replacing.

40% rear tread, 20/30% front tread. To suit MF 7700 series, Valtra T-series, Fendt 700-series Gen 6 and similar. 10/335/281 rear & front stud pattern (also comes with 8-stud rear adaptor plates).

Ex lorry conversion, the frame & body are both sound. C/w sprung axles, dual wheels, grain chute and manual tailgate.

Very original tractor C/w manual transmission, Explorer cab, drawbar, linkage, 1 single & 1 double spool, and a PTO. Fitted with front weights and rear wheel weights. Very original example! Recording 6,543 hours. ...

A very nice hedge cutter! C/w 1.2m ProTrim head with rotor reverse & rear roller, A-frame, head & arm float, parallel arm geometry, joystick controls, and 5.7m reach. Serial no: B171038.

A very nice example! C/w front linkage, standard front axle, 40kph PowerQuad transmission, 3 spools, rear linkage, pick-up hitch, drawbar, and 540/540E/1000PTO. Also fitted with a nice set of 600/65R38 Alliance & ...

A very nice example! C/w TLS suspension & cab suspension, pick-up hitch, drawbar, linkage, 4 spools, 540/540E/1000 PTO, and 40kph AutoQuad transmission with creeper too! This is a very tidy tractor with very littl...