Used farm machinery in Sudbury for sale

40kph AutoPowr - in very good order. Runs and drives spot on and has been well cared for. Fitted with front linkage, 4 ESCV's, 540/1000 PTO with in-cab selector, hydraulic trailer brakes and pickup hitch. Fitted ...

5.9l Turbo Cummins engine - goes and sounds well! Fitted with the 40kph 24 speed creeper box, front linkage, 2 SCVS, 540/1000 PTO, hydraulic trailer brakes and pickup hitch. Cab is reasonably tidy and the AC is a...

C/w rollbar, 5921 hours This runs and drives fine and pto works however is quite rusted, and the rear linkage and handbrake are seized because of this. Still very useable as a shunter tractor or tug tractor. Sol...

Hydraulic drive - runs up very well. ISOBUS control, variable rate control, boarder spreading device, weigh cells, hopper cover and rear ladder. Slightly scruffy around the bottom, but runs very well. Recording 1...

C/w intergrated Starfire 6000 dome with RTK A tidy 1 owner tractor, direct from a Lincolnshire veg farm. Fitted with the 42kph IVT gearbox, front weight block, 12 x 43kg wafer weights, 5 ESCVS, PowerBeyond, ISOBU...

24' breaker rings. Very good rings, a little wear in the pivots but nothing terrible and would go straight to work.

Fitted with rear drawbar. C/w track eradicators, rear levelling board and bar crumbler. Runs up very well. Serial no: 232

GPS forward speed and hydraulic fan. Fitted with track eradicators, 36 Sabre tine coulters at 166mm spacing, tramlining, bout and pre-em markers, depth wheel and double following harrow. Recording 3330 Ha worked....

Fitted with 22' plain rings. A nice, well cared for set of rolls. Fold and unfold well and ready to go to work. Serial no: 104710072

Fitted with rigid tine kit. In reasonable condition. Serial no: 96680080

C/w front and rear hay ladders. Complete with headboard, LED lighting, hydraulic trailer brakes and steel chequered floor. Running on 6 stud axles, 5 leaf spring suspension and 400/60 15.5 flotation wheels. Deck ...

C/w rear drawbar The discs are getting down but the machine is in good order. Bright paintwork, no welding good bearings and scrapers throughout. Manual gang angling. Serial no: 81889077

Universal style linkage to suit any compact tractor New and unused, 40mm thick durable poly blade, spring loaded break-back protection, lift ram, manual angling and adjustable skid shoes. Serial no: 141282

Run up very well. Fitted with electrically control lift and ground pressure adjustment. Hydraulic offset adjustment. Plastic blade conditioner. Serial no: K0012

C/w manual lift rear ramps 15 foot bed, 3 foot beavertail. Bed with is 2.3m, bed height off ground is circa 1m.

400mm diameter. For repair or conversion to 3m. One section has worn through in a couple of places - either wants repairing or cutting out to convert to a 3m packer.

Fitted with very good Michelin AgriBib RC tyres Previously fitted to a New Holland T7. Front wheels - Adjustable centers. Hub Fitment - Center bore: 362mm, PCD: 8 x 405mm, Stud Size: 17mm Rear wheels - Adjustab...

10-12 ton capacity! Ex-MOD. Was used by the previous owner for recovering stuck Sugar Beet harvesters - this is a capable winch! Fitted with ground anchor. Serial no: 21988

Fitted with BKT Agri Max RT657 tyres Tyres are quite flint cut and have had several puncture repairs but are hold air and appear to be sound. Approx 35mm of tread remaining. Hub Fitment - Center Bore: 370mm, PCD...

Rims to fit 10 stud commercial axles. Fitted with 3 BKT FL693M and 1 Alliance 882 Agri Transport tyres. all with good tread remaining. Hub Fitment: Center bore: 281mm, PCD: 10 x 335mm, Stud size: 25mm