Used farm machinery in Haverhill for sale

To fit John Deere 5510 or similar. Fitted with Alliance tyres - hub measurement shown in photos. Drive: 4WD

Fitted with front linkage and cab suspension. C/w the 40kph 20/20 PowrQuad Plus, gearbox, front linkage, 1 front SCV, standard front axle, HCS cab suspension, 4 rear SCVS, 540/540E/1000 PTO, hydraulic trailer bra...

Showing just 2 owners from new. A nice classic Roadless with lovely patina! The bonnet and nose cone look to have been repainted at some point in the past but the rest is in lovely original condition. Runs and dr...

Quite the machine, c/w GPS with RTK Fitted with a 12.9 litre 6 cylinder 560hp engine, 16 speed full powershift gearbox, 6 ESCVS, Power Beyond, hydraulic trailer brakes, full set of front weights and swinging rear...

Fully sprung with hydraulic tailgate. A good solid trailer with very little rust. On super singles with geed tyres all round, hydraulic trailer brakes and LED lighting. Serial no: 2794

Very good wearing metal throughout. 6 subsoiling legs with shearbolt protection, 2 rows of removable 500mm cutaway discs and 760mm Multi-packer. Serial no: 10148

Brand new tyre on rim. 12 Ply rating with Dual Beads. Rim hubfitment - 8x275mm PCD, 221mm center bore, 21mm stud dia.

Fitted with System Disc and cast ring packer. An older cultivator but still good to go again! Folds to 2.5m for transport and fitted with good tyres. Serial no: 2044

Angle and height adjustable wheels. Runs up well and folds to sub 3m for transport. It has had some strenghtening on the headstock and a few small welds as pictured. Serial no: SN11385

Fitted with double rotocrats. In resonably good condition with some strengthening around the linkage brackets. The hydraulics are all working correctly and the depth wheels are all holding air. Two of the adjuste...

Hydraulic front furrow adjustment. A good straight plough with hydraulic front furrow and hydraulic vari width adjustments. Fitted with No. 28 Bodies with plenty of life remaining, full set of skimmers and rear s...

15 speed powershift, c/w pick up hitch and 3 double spool valves! Comes with a full set of wafer weights and on good 420/85R28 and 520/85R38 tyres. A good solid workhorse! Cab interior is a little average and the...

Good tyres, to fit Fendt Tractor Centre sizes included in photos. Good overall condition. Drive: 4WD

A good set of Michelin XM108 tyres Photos of centre sizes included

Very good Michelin XM108 tyres. Centre sizes included in photos.

Good wearing metal - on C40 boards. C/w hydraulic front furrow adjustment, manual vari-width (currently set to 40cm/16'), 90cm point to point, full set of skims and depth wheel. Serial no: 249 451

Done just 3655 hours, c/w air brakes! A nice spec loader tractor this is, fitted on 380/85R24 and 420/85R34 tyres, 2 double spool valves, hydraulic pick up hitch with drawbar and hook clevis. Fitted with FL.371 ...

All working as they should! To fit Cat. 1 or 2 linkage. Tyres are perished but all holding air. Serial no: 118018

Rusty and scruffy but runs up fine. Fitted with 3 rotors, 4 adjustable castor wheels and to fit Cat.1 linkage. Needs PTO guard, sold as is.

To suit Grey Fergie or similar. Needs a new floor. Measures 4ft wide by 3ft high by 3ft deep.