Used farm machinery in Cambridge for sale

Fitted with very good Alliance A-350 tyres. Front wheels - 29mm tread remaining. Hub fitment: 10 x 335mm, Stud size: 22mm, Center bore: 281mm, Offset: 110mm Rear wheels - 31mm tread remaining. Hub fitment: 10 x ...

Fitted with excellent Taurus Point 8 tyres. Both fronts and rears have 48mm of tread remaining. Will come with clamps. Drive: 4WD

Fitted with Continental front tyres and BKT rears. Front tyres: Continental Contract AC65, 28mm tread remaining, flint cut but hold air. Rear tyres: BKT Agri Max RT657, 26mm tread remaining, flint cut but holdin...

A good amount of tread remaing. Hub fitment: 8 x 275mm, Stud size: 21mm, Center Bore: 221mm

Fitted with Kleber Super 3 tyres Tyres are worn and come with adjustable centers. Hub fitment: 8 x 205mm PCD, 19mm countersunk studs, center bore: 140mm

Fitted with very good Michelin Bib X tyres. 40mm of tread remaining, adjustable centers. Hub fitment: 8 x 275mm PCD, 19mm countersunk studs, center bore: 221mm

For spares or repair. Looks to be mostly complete but no control box. C/w hydraulic fan and electric shutoff actuator. Serial no: 2059 B Drive: 2WD

On No. 8 Bodies Lines up well, manual vari-width currently set to 14', mix of boards, some sharp some nearly new. Rear depth wheel and a full set of skims.

C/w NAV-900 AutoGuidance Precision-IQ and CenterPoint RTX. In good condition and comes with various looms. Previously used on a Massey and JCB Fastrac.

Runs well! Reasonably good mechanically with the clutch, brakes, linkage and PTO all working just as they should. Needs a little heat to start as is typical with these older Internationals but once warm goes very...

Fitted with steering tyre packer. Twin hopper, twin metering untils, hydraulic fan and land wheel drive. C/w Accord ESC gearbox. Serial no: 23042

Very heavy duty! Hydraulic lift, legs are at 80' / 2.03m centers. C/w spare tyre.

Good legs. Legs have reasonable wearing metal, fitted with discs and rear depth wheel. Sold as is. Serial no: 490A1266

25 VibroFlex tines at 25cm spacing. A well built cultivator fitted with depth wheels.

Well built cultivator. Fitted front levelling board, two rows of pigtail tines, a toothed packer roller, 2 further rows of pigtail tines and a rear toothed packer. 3.1m transport width. Serial no:90515

C/w storage stand. Fitted with 2 stock fan jet spreaders, Fanjet 36 controller and long power lead. 12V power required.

To fit Toro Dingo 4 foot width, ex-demo condition.

Just 5,395 hours! In tidy order and in good mechanincal condition. Still fitted with its original rear tyres and comes with the 48-speed 40kph gearbox, front weights, 3 SCVS, hydraulic trailer brakes, pickup hitc...

A high capacity precision seedbed cultivator! Fitted with track eradicators, front flexboard, 1 row of 320mm dia B-rollers, 130 Vibro Super G tines across 5 row and a spacing of 60mm, rear levelling boards, anoth...

Fitted with 2 x Horstine Twin Air Applicators. Mounted on a Landquid demount skid with 36m tri-fold Alu-light booms, 4 section cut off, hydraulic fan, 2 x Horstine Twin Air Applicators with PS8000i RDS controllor...