Used farm machinery in Halstead for sale

Fitted with a JD H310 loader. Comes with everything that you need and nothing that you don't! A nice basic standard model tractor but fitted with TLS front suspension, A/C and the 40kph 24/24 PowrShift Plus gear ...

Dual clutch example. A very original and straight example fitted with grassland tyres. C/w the 3 cylinder Perkins engine and runs and drives well and looks to have been used maily for running a sawbench. Recordin...

Fitted with height adjustable wheels. 1000 speed PTO required. An older machine and runs up with a little vibration but would go to work. Fitted with hammer flails. 2.8m working width.

Hydraulic sideshift. Runs up very well and fitted with adjustable skids and 24 hammer flails. Heavy duty machine with rear roller and a 2.6m cutting width. Serial no: 82468

Looks to be in good order. In regular use until quite recently. Serial no 03LS07 Drive: 2WD

Euro-fit brackets. Hardly been used! Fitted with spikes covered with removable rotating rollers, hydraulic arm width adjustment. Serial no: 373111

BKT AGRIMAX RT945 tyres. c/w fixed centres and in as new condition. To fit Claas 610 or similar.

Runs and drives - for spares or repair. A very original tractor in need of some TLC. The engine starts, runs and pulls well although a little smokey when cold. The Hi-Lo powershift is all working correctly as is ...

32 coulters at 125mm spacing. Fitted with track eradicators, 32 coulters across 3 rows, double following harrow, bout markers and tramlining. Land wheel drive and PTO driven fan. Looks to be in good condition. S...

In very good condition throughout. 23 disc coulters and c/w two rollers for grain and fertiliser and hydraulic markers. Serial no: B0121

C/w press arm. C40 bodies, Manual vari width currently set to 38cm, 100cm point to point clearance and shearbolt leg protection. A tidy plough fitted with a full set of skimmers with a good amount of life remaini...

C/w pulling arms Linkage mount for transport,

2.5m³ Capacity. 8' wide and in very good order. Fitted with brackets to fit CAT telehandler. Serial no: BK25-179481

Fitted with the 24' front discs, 8 auto-reset subsoiling legs, A straight machine with reasonable wearing metal, 24' front discs, 8 A/R subsoiling legs, 2 rows of short discs and rear Multipacka. C/w hydraulic b...

Runs up well Serial Number: 3282

Done just 135 hours and in excellent condition. Road registered and fitted with a 25hp Yanmar engine, 2 speed Hydrostatic transmission, mid and rear PTO, 1 SCV, hydraulic toplink and 6 x 20kg front weights. Seri...

Full set of skims and rear disc. YL bodies with YL57 shares with a few spare. The adjuster is seized but the disc bearing is good and looks to be a straight plough.

Upgraded to ISOBUS control. C/w PTO driven fan, front depth wheels, 16 tine coulters at 250mm spacing, tramline shutoff, bout and pre-em markers and rear tyre packer. Folds to 3m for transport and comes with a la...

Full enclosed air conditioned cab and 400CX loader Runs and drives very well. Fitted with a 58hp, 2.8L 4 cylinder turbo engine, 3 speed hydrostatic gearbox, 540/540E PTO, 3 SCVS and pickup hitch. A comfortable ca...

Lorry trailer conversion. Fitted with airbrakes and air suspension. Looks to be in reasonable condition and fitted with front and rear ladders. LED lights. Serial no: A130693