John Deere 6430
2012
£34,750 +VAT
Fitted with a JD H310 loader. Comes with everything that you need and nothing that you don't! A nice basic standard model tractor but fitted with TLS front suspension, A/C and the 40kph 24/24 PowrShift Plus gear ...

Autotrader farm
Skip to contentSkip to footerWith 398 used machines in Royston available on Auto Trader, we have a fantastic range of farm equipment for sale across the UK.
John Deere 6430
2012
£34,750 +VAT
Fitted with a JD H310 loader. Comes with everything that you need and nothing that you don't! A nice basic standard model tractor but fitted with TLS front suspension, A/C and the 40kph 24/24 PowrShift Plus gear ...

£3,250 +VAT
Dual clutch example. A very original and straight example fitted with grassland tyres. C/w the 3 cylinder Perkins engine and runs and drives well and looks to have been used maily for running a sawbench. Recordin...

£2,450 +VAT
Fitted with height adjustable wheels. 1000 speed PTO required. An older machine and runs up with a little vibration but would go to work. Fitted with hammer flails. 2.8m working width.

Agrimaster KN260
2018
£2,450 +VAT
Hydraulic sideshift. Runs up very well and fitted with adjustable skids and 24 hammer flails. Heavy duty machine with rear roller and a 2.6m cutting width. Serial no: 82468

£750 +VAT
Looks to be in good order. In regular use until quite recently. Serial no 03LS07 Drive: 2WD

Mchale BH Rd
2020
£1,450 +VAT
Euro-fit brackets. Hardly been used! Fitted with spikes covered with removable rotating rollers, hydraulic arm width adjustment. Serial no: 373111

£2,975 +VAT
BKT AGRIMAX RT945 tyres. c/w fixed centres and in as new condition. To fit Claas 610 or similar.

John Deere 3130
1978
£4,500 +VAT
Runs and drives - for spares or repair. A very original tractor in need of some TLC. The engine starts, runs and pulls well although a little smokey when cold. The Hi-Lo powershift is all working correctly as is ...

Weaving 1SE4MTS
2008
£6,500 +VAT
32 coulters at 125mm spacing. Fitted with track eradicators, 32 coulters across 3 rows, double following harrow, bout markers and tramlining. Land wheel drive and PTO driven fan. Looks to be in good condition. S...

£2,950 +VAT
In very good condition throughout. 23 disc coulters and c/w two rollers for grain and fertiliser and hydraulic markers. Serial no: B0121

£6,950 +VAT
C/w press arm. C40 bodies, Manual vari width currently set to 38cm, 100cm point to point clearance and shearbolt leg protection. A tidy plough fitted with a full set of skimmers with a good amount of life remaini...

£1,450 +VAT
2.5m³ Capacity. 8' wide and in very good order. Fitted with brackets to fit CAT telehandler. Serial no: BK25-179481

Sumo QUATRO 4
2007
£17,950 +VAT
Fitted with the 24' front discs, 8 auto-reset subsoiling legs, A straight machine with reasonable wearing metal, 24' front discs, 8 A/R subsoiling legs, 2 rows of short discs and rear Multipacka. C/w hydraulic b...

£3,500 +VAT
Ransomes Spider ILD01 remote control bank mower, year 2006, Kawasaki petrol engine, 4 wheel steer, charger. *Trade sale* Sold as seen. £3,500 + VAT

£2,000 +VAT
Baroness LM66TB fine cut mower, year 2015, Subaru petrol engine, 7 bladed cutting cylinder, front grooved roller, collection box, idea for fine turf areas, golf greens & tees, bowling clubs, tennis clubs and crick...

£2,000 +VAT
Allett Buffalo 34 cylinder mower, year 2013, Honda GX160 petrol engine, 864mm (34") cutting width, front roller, 200mm (8") 8 bladed cylinder, cutting height from 10mm - 40mm, grass box, ideal for sports grounds a...

£1,200 +VAT
Wintons WFM150 finishing mower (New), 1.5m cutting width, 3 blade spindles, CAT 1 linkage mounted, 540rpm PTO driven, cutting height from 35mm - 80mm, min 20hp tractor required, weight 182kg. £1,200 + VAT

Dw Tomlin Topper
2025
£1,550 +VAT
DW Tomlin topper, 1.5m working width, single blade rotor with swinging blade tips, floating top link, CAT 1 mounted, 540rpm PTO driven, PTO shearbolt protected, HOC from 25mm - 100mm, min 24hp tractor required, we...

£1,590 +VAT
Wintons WFL125 flail mower, (NEW), 125cm working width, heavy duty hammer flails, rear roller, CAT 1 linkage mounted, 540rpm PTO driven, cutting height from 3cm - 8cm, 20 - 40hp tractor required. £1,590.00 + VAT
