Used farm machinery in Essex for sale

Premium Edition - just 2947 hours. Tidy example just in! CommandPro controls, 50kph AutoPowr, Front linkage, 1 front ESCV, TLS front suspension, HCS Cab suspension, 4 rear ESVS, 540/540E/1000PTO, Power Beyond, Ai...

Fitted with 22' plain rings. The rings and bearings are all good however the unfolding pivots need attention. Transport width: 3.4m

Cable controls - a nice basic machine! Fitted with a 1.2m head with T-flails and rear roller. In very good order throughout and will go straight to work. Serial no: PB450130281

C/w track eradicators and hydraulic levelling paddles In good condition throughout and fitted 20' scalloped discs, hydraulically adjustable levelling paddle, Multipacka rear press and braked axle. Folds to 3m for...

A heavy duty flail! Fitted with 20 hammer flails and rear roller. 540 PTO speed and requires and minimum of 60hp. Serial no: 62568

In excellent condition! 6m cutting width, front and rear rollers and 33 blades across 11 rotors! Runs up very well and folds hydraulically to 2.66m for transport. Serial no: S181495

Good metal with tungsten. On No. 8 bodies with skimmers and rear discs. Tungsten points and shares. Hydraulic vari-width and manual front furrow width. Serial no: 119

Brand new - never fitted! Date code on the 540/65 R28s: 4923 / Date code on the 650/65 R38s: 1623. Will sell as 2 separate pairs. Drive: 4WD

Fitted with hammer flails. Runs up well enough but a little rumbly. Fitted with a rear roller. Some welding and a few cracks as shown but will go to work. Serial no: 105318

C/w front & rear coils, end tow kit. Fitted with front and rear coils (both useable but in poor condition), 3 rows of S tines, rear dutch harrow tines with hydraulic depth control.

C/w 3 rows of Vibroflex tines, hydraulic levellers & DD ring double packer A strong press with ability to penetrate straight into stubble Due in, not in our yard yet. *Video included is credit to Philip Watkins...

Fitted with Alliance A-350 tyres Front wheels with adjustable centers Fitment: 8 x 275 PCD Center bore: 221mm Stud dia: 20mm Front wheels with adjustable centers Fitment: 8 x  205mm PCD Center bo...

36-speed 3-speed power shift and a 7.4 litre 170hp engine Goes well! Fitted with a full set of front weights and rear wheel weights, 5 ESCVS, 540/1000 PTO, Cat. 3 linkage, hydraulic trailer brakes and hydraulic p...

A tidy low hour example. Just 3,917 hours. Fitted with a 37kph, 32 speed Dynashift gearbox, full set of front weights, 2 SCVS, hydraulic trailer brakes, 540/1000PTO, Cat. 2 rear linkage and pickup hitch. Serial ...

Quite a straight example. Very little rust and tidy all round. Fitted with front weights, 2 SCVS, PTO and pickup hitch. Starts and runs well but engine is getting worn and is a little smokey and breathing. Record...

Suffolk coulter drill. The Maratori ME14C 300 power harrow is fitted with clod boards, a toothed packer and runs up very well with no sign of any leaky rotors. The Accord Pneumatic DA drill has a belt driven fan,...

Good straight booms with hydraulic fold. Pump runs up well, 3 section cut off. Not in test so sold as it but doesn't appear to need much to sort. Serial no: 1218

Fitted with depth wheels and 31 tines! This cultivator has been modified to take an extra row of tines giving a total of 31 tines and 20cm spacing. 3m transport width. Serial no: M6876

In very good order. Fitted with front and rear coil packer, 3 rows of adjustable S tines and adjustable finger harrow. Transport width: 3.9m

3 rotor topper, 9ft cut. Runs up well and comes with depth adjustable skids. Serial no: 933904