Used farm machinery in Chelmsford for sale

80% tread, good sidewalls.

A nice springtine cultivator! C/w manual adjusting sprung levelling board, followed by 4 rows of sprung tines, another sprung levelling board, and a Crosskill roller.

Good wearing metal. C/w 6 low disturbance legs with Tungsten points, followed by 2 rows of cutaway discs, and a rear 800mm MultiPacker. Serial no: 2093.

C/w rear roller, boot flails, front & rear flaps, and side skids. Serial no: 1724D.

In very nice order! Runs up well! C/w front safety chains, hammer flails, rear roller, and hydraulic sideshift. Serial no: 110701.

To suit JCB Q-fit headstock. Front edge is fairly worn, and has cracked off at both ends of the bucket.

Wheel-driven mowers, comes with rear rollers. The wheels need freeing-off, and the tyres need replacing.

40% rear tread, 20/30% front tread. To suit MF 7700 series, Valtra T-series, Fendt 700-series Gen 6 and similar. 10/335/281 rear & front stud pattern (also comes with 8-stud rear adaptor plates).

In good order, PTO-driven. Comes with 14" & 6" augers. Serial no: 9811505.

Ex lorry conversion, the frame & body are both sound. C/w sprung axles, dual wheels, grain chute and manual tailgate.

Very original tractor C/w manual transmission, Explorer cab, drawbar, linkage, 1 single & 1 double spool, and a PTO. Fitted with front weights and rear wheel weights. Very original example! Recording 6,543 hours. ...

A very nice hedge cutter! C/w 1.2m ProTrim head with rotor reverse & rear roller, A-frame, head & arm float, parallel arm geometry, joystick controls, and 5.7m reach. Serial no: B171038.

A very nice example! C/w front linkage, standard front axle, 40kph PowerQuad transmission, 3 spools, rear linkage, pick-up hitch, drawbar, and 540/540E/1000PTO. Also fitted with a nice set of 600/65R38 Alliance & ...

A very nice example! C/w TLS suspension & cab suspension, pick-up hitch, drawbar, linkage, 4 spools, 540/540E/1000 PTO, and 40kph AutoQuad transmission with creeper too! This is a very tidy tractor with very littl...

Very good wearing metal! C/w 7 winged shear-bolt tines, followed by 8 mixing / levelling discs (including side discs with manual folding), and rear T-ring packer. Serial no: 24707.

Tips well! C/w hydraulic brakes, wooden floor and dropsides, and manual tailgate.

An older set of discs, but with a sound frame! C/w a row of angled cutaway discs, which are fairly worn, and a row of plain discs.

In good order, transports 56 small bales. All operates as it should, tilt ram works well.

Hydraulic angling on front gang. C/w very good cutaway discs and rear drawbar with hydraulics. Serial no: 1551979.

Done just 42 hours! C/w 48" cutting deck with foot-operated & spring assisted height adjustment, zero-turn steering, and a good set of tyres. Goes very well! Serial no: 025065.