Used Kverneland farm machinery in Cambridge for sale

Very nice plough! Still on some of its original no.8 bodies. C/w rear discs and manual vari-width. Serial no: 12082.

Useful spec tine drill. C/w front levelling paddles, bout & pre-em markers, following harrow. 48 tine coulters with tungsten points (125mm row spacing), ELDOS electric drive metering with selection of seed rolle...

Kverneland press arm to suit LO on-land/in-furrow plough

Land wheel drive, in excellent condition. Comes with Signus control box. Serial Number: 46622

Hydraulic drive. ISOBUS control, variable rate control, boarder spreading device, weigh cells, hopper cover and rear ladder. Runs well. Recording 1,479 hours. Serial no: VN2690101126

Good wearing metal throughout, including tungsten points. Fitted with No. 9 bodies, manual front furrow adjustment, manual vari-width, a full set of skimmers, furrow widener and rear depth wheel. Serial no: 1395...

In very good order - still on it's original No. 28 bodies. Fitted with hydraulic front furrow adjustment, manual vari-width (currently set to 16'), knock-on points, skimmers, rear discs and depth/transport wheel....

A good straight plough. C/w hydraulic vari-width & front furrow width, No. 28 Bodies with plenty of life remaining and full set of skimmers. Also fitted with rear depth/transport wheel, and new landslides. It's ...

No. 28 bodies and hydraulic vari-width. 6+1 configuration, hydraulic front furrow adjust, hydraulic vari-width, full set of skimmers and dual depth wheel. Some of the boards are just getting starting to get sharp...

On No. 8 Bodies, long clearance - 100cm point-point. Lines up well, manual vari-width currently set to 14', mix of boards, some sharp some nearly new. Rear depth wheel and a full set of skims.

Fitted with steering tyre packer. Twin hopper, twin metering untils, hydraulic fan and land wheel drive. C/w Accord ESC gearbox. Serial no: 23042

Suits LD, LB, ED and EG 300 ploughs In reasonable condition. Hydraulic press release.

For spares or repair, fitted with Amazone Rotec disc coulters. 32 coulters at 125mm spacing, belt drive fan. Sold as is as missing its land wheel and various hoses. C/w stands.

17 Reflex tines. Tidy machine fitted with depth wheels. A couple of welds but done well. Hydraulic folding with a transport width of 2.5m. Serial no: 1365

Fitted with rear crumblers. Sprung and angle adjustable discs with depth adjustment on the rar crumblers. Folds to sub 3m for transport.

Fitted with good metal throughout! In tidy order and turns over well. Serial Number: 636 Drive: 2WD

9 hydraulic auto-reset legs. Hydraulic folding, rear Cracker packer. All new Kverneland legs and wearing metal. Ex CTS Stubble Finisher, this has been professionally converted. Serial no: 225