Used Plant machinery in Newmarket for sale

120hp Ford 6 cylinder engine. Fitted with the Q-cab, front weight, rear linkage and PTO. Trackwork is in reasonable order and the single lever steering and hydraulics are all working well. Starts and drives well....

100hp 4.5l John Deere engine with 4 speed gearbox. 2.8t capacity with 5.6m reach. Fitted with hydraulic pick up hitch, tipping pipe and pin and cone headstock. Runs and drives well and recording 9412 hours. A/C i...

On good rubber tracks. Recording 2685 hours and in reasonable condition for the age. Some wear in the kingpin and in various pins and bushes but nother stopping it going to work. Piped for a breaker or other atta...

A powerful ag spec handler. C/w 142hp engine with a 40kph 6 speed powershift transmission. In tidy condition throughout and is fitted with a pin and cone headstock with hydraulic locking and 3rd service, hydrauli...

Detroit 6-71 2-Stroke Diesel! A classic crawler that may well have seen action in World War 2. Fitted with hydraulics and rear drawbar. Serial no: 3571

6 cylinder Ford engine. Good trackwork, the engine is free and has been running however will need some TLC to put it back to work. Rear linkage is incomplete. Serial no: 1261801

To fit 10 - 18t excavator. Comes with weld-on dipper pad. To suit a quickhitch with the following dimensions: 60mm Pin dia, 370mm Center to Center and 270mm dipper gap. The overall width of the grab is 1250mm.

C/w hydraulic high tip, pto driven brush. 1.2m working width. In good order. Serial Number: K-SC17327

A nice example c/w drawbar Has been part of a collection for a number of years, and starts, runs and drives! Serial Number: 6101

C/w Leyland 6 cylinder engine This has had a track Marshall hydraulic and linkage fitted at some stage. Runs and drives very well.

Only 1836 hours! Comes with pallet tynes. A nice low houred example, on good tyres and overall tidy condition.

Versatile machine in good order. In tidy condition throughout and fitted on very good tyres. C/w with a 74hp turbo Deutz engine and 2 speed hydrostratic gearbox. Telescopic boom with max height of 5m, pin and con...

Chilton Loader brackets Opposing tines, some welding been done. Serial no: 5441

12,000kg lift capacity! Powerful and capable handler the a lift height of 10M. Fitted with a 170hp Iveco 6 cylinder engine and 2 speed hydrostatic gearbox, frame leveling and hydraulic side shift and reversing ca...