Used Plant machinery in Royston for sale

Piped for breaker, 3 buckets, 2800hrs. A respectable digger that has had some paintwork done in its time. Runs well, with 2 speed tracking working and trackwork is very serviceable.

C/w pick up hitch and pallet forks A capable machine with plenty of poke! In fair condition for its age, it is now showing 11,098 hours but runs and drives well. *NOTE: there is a significant leak from the exhau...

Hammer pipe work, manual quick hitch, 3 buckets, heated cab, long dipper arm: 950mm - 2250mm dig depth, 2 speed tracking, variable width undercarriage 990mm < 1240mm, straight cab and chassis with no damage, sligh...

Good condition. Hammer pipe work, immobiliser, 3 buckets, green beacon, long dipper 1150mm arm: 2670mm dig depth, straight chassis and panels with no damage, small crack in the platform floor, good paintwork. New...

No VAT. Good condition. Hammer pipe work, 3 buckets, 1720mm dig depth, variable width undercarriage 700mm < 860mm. Straight chassis with no damage, the front orange panel has been damaged, good paint work, new p...

Done just 5455 hours! Fitted with 6 way 12ft blade, joystick control and also with rear linkage. See photos for track condition, blade is good, this could go straight back to work. Serial Number: DHA02256

Purchased in summer 2024,Perkins diesel engine 439 hours , on wheels , 50ml cutting gate , remote control & charger , Magnetic belt . used on pre shredded wood only

Willibald Minishark Electric shredder . Purchased 2024, but never been used . on wheels , 90 kw motor . mag belt . 50 ml cutting gate . Gross weight 10000 kg Transport dimensions 9.970 x 2.500x3.900 mm

Runs and drives well! Based on a Fordson Major Mark 1 with the 4 cylinder diesel. Starts quickly and drives and steers as it should. The trackwork all looks to be in good condition and is still fitted with the or...

C/w pick up hitch and pallet tines Powered by a Perkins engine, this is a respectable looking handler now recording 11,064 hours. NOTE: significant wear in front axles, headstock pin, and bottom end of main lift...

125 CFM, 7 BAR, Kubota V1505 diesel engine, Hard Hat canopy. Starts first time, runs and makes air. Straight chassis and canopy, good paintwork, towable condition, fully serviced. Part exchange welcome, finance o...

Fitted with 3 point linkage. Starts, runs, drives and steers well. Rear PTO and linkage are all working. Quite a complete example with the engine covers and County serial plate all there. Tractor serial no: 1287...

Hammer pipe work, Harford Prolok manual quick hitch, 3 buckets, long dipper 1350mm arm: 2965mm dig depth, heated cabin, immobiliser, 2 speed tracking, variable displacement pump, auto idle, green beacon. Straight ...

C/w removable sides Handy little trailer in reasonable condition. The lift ram has a bit of a leak but nothing stopping it from going to work. Missing the rear tailgate. Serial no: 6419

New and unused. Hill Tefra hydraulic quick hitch, choice of 3 buckets, hammer pipe work, X3 third hydraulic rotation circuit, proportional control joysticks, floating dozer blade, green seatbelt beacon, electric ...

New and unused condition. Hammer pipe work, manual quick hitch, choice of 3 buckets, long dipper arm: 1500mm - 3088mm dig depth, 2 speed tracking, adjustable auxiliary hydraulic flows, auto idle, variable displace...

New and unused condition. Hammer pipe work, hydraulic quick hitch, choice of 3 buckets, long dipper arm: 1350mm - 2965mm dig depth, 2 speed tracking, adjustable auxiliary hydraulic flows, auto idle, variable displ...

500KGS High Tip Tracked Dumper. Diesel electric start engine, hydrostatic transmission, tipping height 2720mm, width 690mm, weight 475Kgs - can be towed on a plant trailer. Straight skip and chassis with no dama...

Runs and drives very well! A handy little machine with plenty of life left in it and good tyres all round. 2.5t lift capacity and a max lift height of 6.4m and reach of 3.6m. Engine runs very sweet, doesn't smoke...

Good condition. Hammer pipe work, manual quick hitch, 3 buckets, reduced tail swing, long dipper arm: 1755mm dig depth, 2 speed tracking, variable width undercarriage 750mm < 1020mm, servo controls, EPA stamp, fu...