Used Plant machinery in Sudbury for sale

Comes with a variety of different buckets. Runs well and all the hydraulic functions are working as they should. Extending boom on back actor and comes with a 5ft ditching bucket, 1ft and 2ft digging bucket and a...

2021 Sany SY 26U Zero Tail Swing 1400 Hours Full Service History Clean & Tidy Throughout Quick Hitch with 4 Buckets Beacons & LED Work Lamps Radio Aux line 2 Speed Tracking Any inspection/Trial welcome ...

In tidy condition, runs up well. 3400l capacity and fitted with a MEC8000 Vacuum pump. Comes with various lengths of pipe and splash plate. Hydraulic brakes and very good super single tyres. Serial no: DS2255

Only 4,606 hours! Just in from a small arable farm in the Fens. In very good condition throughout and fitted with a 108hp Perkins engine, 40kph 2 speed hydrostatic gearbox, hydraulic pickup hitch, 3rd service and...

On good rubber tracks. Recording 2685 hours and in reasonable condition for the age. Some wear in the kingpin and in various pins and bushes but nother stopping it going to work. Piped for a breaker or other atta...

2019 18 Z-1 1.8 Tonne Zero Tail Swing mini Excavator Only 785 Hours Well Maintained Recently Serviced (genuine parts) Good Tracks Good clean condition Quick Hitch 4 Buckets 2 speed Tracking Expanding Tracks Work...

A powerful ag spec handler. C/w 142hp engine with a 40kph 6 speed powershift transmission. In tidy condition throughout and is fitted with a pin and cone headstock with hydraulic locking and 3rd service, hydrauli...

Detroit 6-71 2-Stroke Diesel! A classic crawler that may well have seen action in World War 2. Fitted with hydraulics and rear drawbar. Serial no: 3571

6 cylinder Ford engine. Good trackwork, the engine is free and has been running however will need some TLC to put it back to work. Rear linkage is incomplete. Serial no: 1261801

To fit 10 - 18t excavator. Comes with weld-on dipper pad. To suit a quickhitch with the following dimensions: 60mm Pin dia, 370mm Center to Center and 270mm dipper gap. The overall width of the grab is 1250mm.

C/w hydraulic high tip, pto driven brush. 1.2m working width. In good order. Serial Number: K-SC17327

A nice example c/w drawbar Has been part of a collection for a number of years, and starts, runs and drives! Serial Number: 6101

C/w Leyland 6 cylinder engine This has had a track Marshall hydraulic and linkage fitted at some stage. Runs and drives very well.

Only 1836 hours! Comes with pallet tynes. A nice low houred example, on good tyres and overall tidy condition.

Versatile machine in good order. In tidy condition throughout and fitted on very good tyres. C/w with a 74hp turbo Deutz engine and 2 speed hydrostratic gearbox. Telescopic boom with max height of 5m, pin and con...

Chilton Loader brackets Opposing tines, some welding been done. Serial no: 5441

12,000kg lift capacity! Powerful and capable handler the a lift height of 10M. Fitted with a 170hp Iveco 6 cylinder engine and 2 speed hydrostatic gearbox, frame leveling and hydraulic side shift and reversing ca...