Autotrader plant

Skip to contentSkip to footer

Used Plant machinery in Haverhill for sale

With 23 used machines in Haverhill available on Auto Trader, we have a fantastic range of plant equipment for sale across the UK.

Latest Plant machinery in Haverhill for sale

View morechevron-right
  • £15,950 +VAT

    Piped for breaker, 3 buckets, 2800hrs. A respectable digger that has had some paintwork done in its time. Runs well, with 2 speed tracking working and trackwork is very serviceable.

  • £7,950 +VAT

    C/w pick up hitch and pallet forks A capable machine with plenty of poke! In fair condition for its age, it is now showing 11,098 hours but runs and drives well. *NOTE: there is a significant leak from the exhau...

  • £67,500 +VAT

    Done just 5455 hours! Fitted with 6 way 12ft blade, joystick control and also with rear linkage. See photos for track condition, blade is good, this could go straight back to work. Serial Number: DHA02256

  • £14,995 +VAT

    Jcb TLT30D forklift diesel full cab bale squeeze work lights/flashing beacon/heater fully serviced this week Jcb genuine new king pins/bearings in back axle certificate of conformity Came in part ex as...

  • £140,000 +VAT

    Purchased in summer 2024,Perkins diesel engine 439 hours , on wheels , 50ml cutting gate , remote control & charger , Magnetic belt . used on pre shredded wood only

  • £149,999 +VAT

    Willibald Minishark Electric shredder . Purchased 2024, but never been used . on wheels , 90 kw motor . mag belt . 50 ml cutting gate . Gross weight 10000 kg Transport dimensions 9.970 x 2.500x3.900 mm

  • £6,500 +VAT

    Runs and drives well! Based on a Fordson Major Mark 1 with the 4 cylinder diesel. Starts quickly and drives and steers as it should. The trackwork all looks to be in good condition and is still fitted with the or...

  • £12,500 +VAT

    C/w pick up hitch and pallet tines Powered by a Perkins engine, this is a respectable looking handler now recording 11,064 hours. NOTE: significant wear in front axles, headstock pin, and bottom end of main lift...

  • £5,800 +VAT

    Fitted with 3 point linkage. Starts, runs, drives and steers well. Rear PTO and linkage are all working. Quite a complete example with the engine covers and County serial plate all there. Tractor serial no: 1287...

  • £950 +VAT

    C/w removable sides Handy little trailer in reasonable condition. The lift ram has a bit of a leak but nothing stopping it from going to work. Missing the rear tailgate. Serial no: 6419

  • £9,750 +VAT

    Runs and drives very well! A handy little machine with plenty of life left in it and good tyres all round. 2.5t lift capacity and a max lift height of 6.4m and reach of 3.6m. Engine runs very sweet, doesn't smoke...

  • £9,750 +VAT

    120hp Ford 6 cylinder engine. Fitted with the Q-cab, front weight, rear linkage and PTO. Trackwork is in reasonable order and the single lever steering and hydraulics are all working well. Starts and drives well....

  • £8,250 +VAT

    On good rubber tracks. Recording 2685 hours and in reasonable condition for the age. Some wear in the kingpin and in various pins and bushes but nother stopping it going to work. Piped for a breaker or other atta...

  • £6,750 +VAT

    Detroit 6-71 2-Stroke Diesel! A classic crawler that may well have seen action in World War 2. Fitted with hydraulics and rear drawbar. Serial no: 3571

  • £3,750 +VAT

    6 cylinder Ford engine. Good trackwork, the engine is free and has been running however will need some TLC to put it back to work. Rear linkage is incomplete. Serial no: 1261801

  • £1,450 +VAT

    To fit 10 - 18t excavator. Comes with weld-on dipper pad. To suit a quickhitch with the following dimensions: 60mm Pin dia, 370mm Center to Center and 270mm dipper gap. The overall width of the grab is 1250mm.

  • £3,250 +VAT

    C/w hydraulic high tip, pto driven brush. 1.2m working width. In good order. Serial Number: K-SC17327

  • £4,750 +VAT

    A nice example c/w drawbar Has been part of a collection for a number of years, and starts, runs and drives! Serial Number: 6101

  • £8,000 +VAT

    C/w Leyland 6 cylinder engine This has had a track Marshall hydraulic and linkage fitted at some stage. Runs and drives very well.

  • £29,750 +VAT

    Only 1836 hours! Comes with pallet tynes. A nice low houred example, on good tyres and overall tidy condition.