Used Kuhn farm machinery in Royston for sale

Runs up very well! An older but good working tedder.

A handy drill in good order! C/w 2010 Kuhn 4m Power Harrow, fitted with Q-fit tines, and toothed MaxiPacker. Also fitted with Kverneland S-Drill, which has CX disc coulters, rear following harrow, pre-em markers, ...

Very tidy condition! Sold untested. C/w 18m hydraulic folding booms, hydraulic fan driven by PTO pump, and micro-granular rollers for Avadex.

Nice condition! C/w wheel track eradicators, tine coulters, following harrow, tramlining, bout markers, and the Quantron S-2 control box. 630 hours, drilled 1140 hectares. Serial no: 24-021247.

Runs up well! Fitted with Kuhn's Digidrive rotor transmission. Serial no: E1389.

This combi-drill comes with a 2002 Kuhn HR4003D 4m Power Harrow and a 2009 Accord DA-S piggy back drill. Features include Quickfit tines, clod board, toothed packer, Suffolk coulters, following harrow, & bout mark...

C/w scraper bar. In very good order. Only done around 300 acres.

Fitted with Maxipacker In good order and rins up very well. Fitted with track eradicators, fast-fit tine holders, tungsten tipped tines, rear clod boards and rear Maxipacker. Serial no: J0736

400mm diameter. For repair or conversion to 3m. One section has worn through in a couple of places - either wants repairing or cutting out to convert to a 3m packer.

Fitted with height adjustable wheels. 1000 speed PTO required. An older machine and runs up with a little vibration but would go to work. Fitted with hammer flails. 2.8m working width.

5+1 configuration, fitted with L bodies. C/w hydraulic front furrow adjustment, full set of skimmers, rear discs, depth wheel, press arm, 80cm underbeam clearance, 96cm point to point and manual vari width (curren...