Used farm machinery in Chelmsford for sale

Good wearing metal. 5+1 configuration, DDS bodies, pin adjust skimmers, manual vari-width and depth/transport wheel. Some wear in the main pivots but is otherwise a genuine plough. Serial no: 11MA36078

60° tip angle! Equipped with air and hydraulic brakes with a load sensing valve, sprung axles and drawbar, heavy duty tailgate with double acting rams, single multistate lift ram, LED lights and fitted on 580/65...

Fitted with a 1.2m high capacity head. A variable forward reach trimmer with a horizontal reach of  6.7m with the boom straight or 6.1m with the boom in forward position. Fitted with electrical proportional cont...

SCN bodies and full set of skimmers 2+1+1 configuration, steel depth wheel and manual front furrow adjustment. A mix of boards, some are sharp some nearly new. Turns over but there is some wear in the headstock. ...

Cast ring packer. System disc with hydraulic depth adjustment. Discs have a good amount of life remaining and the machine is fitted with very good tyres. 2.5m transport width. Serial no: 476

C/w toothed mid packers, ring type rear packer, very nice example! Fitted with front levelling boards, 2 rows of tines, toothed packer, further 2 rows of tines and rear ring type packer. Serial no: 948S0050

KG 403 heavy duty power harrow and AD-P 402 Profi disc drill Fitted with track eradicators, Q-fit tines, clod boards, Wedge Ring rubber packer, Rotec disc coulters and covering harrow. The drill is fitted with a ...

C/w 1.2m head with hydraulic roller. In good condition throughout and runs up very well. Fitted with T-flails, variable forward reach arm with head and boom float, hydraulic break back protection, oil cooler, A-f...

Premium Edition - just 2947 hours. Tidy example with CommandPro controls, 50kph AutoPowr, Front linkage, 1 front ESCV, TLS front suspension, HCS Cab suspension, 4 rear ESVS, 540/540E/1000PTO, Power Beyond, Air an...

Fitted with 22' plain rings. The rings and bearings are all good however the unfolding pivots need attention. Transport width: 3.4m

Cable controls - a nice basic machine! Fitted with a 1.2m head with T-flails and rear roller. In very good order throughout and will go straight to work. Serial no: PB450130281

C/w track eradicators and hydraulic levelling paddles In good condition throughout and fitted 20' scalloped discs, hydraulically adjustable levelling paddle, Multipacka rear press and braked axle. Folds to 3m for...

A heavy duty flail! Fitted with 20 hammer flails and rear roller. 540 PTO speed and requires and minimum of 60hp. Serial no: 62568

In excellent condition! 6m cutting width, front and rear rollers and 33 blades across 11 rotors! Runs up very well and folds hydraulically to 2.66m for transport. Serial no: S181495

Brand new - never fitted! Date code on the 540/65 R28s: 4923 / Date code on the 650/65 R38s: 1623. Will sell as 2 separate pairs. Drive: 4WD

Fitted with hammer flails. Runs up well enough but a little rumbly. Fitted with a rear roller. Some welding and a few cracks as shown but will go to work. Serial no: 105318

C/w front & rear coils, end tow kit. Fitted with front and rear coils (both useable but in poor condition), 3 rows of S tines, rear dutch harrow tines with hydraulic depth control.

Fitted with Alliance A-350 tyres Front wheels with adjustable centers Fitment: 8 x 275 PCD Center bore: 221mm Stud dia: 20mm Front wheels with adjustable centers Fitment: 8 x  205mm PCD Center bo...

36-speed 3-speed power shift and a 7.4 litre 170hp engine Goes well! Fitted with a full set of front weights and rear wheel weights, 5 ESCVS, 540/1000 PTO, Cat. 3 linkage, hydraulic trailer brakes and hydraulic p...

A tidy low hour example. Just 3,917 hours. Fitted with a 37kph, 32 speed Dynashift gearbox, full set of front weights, 2 SCVS, hydraulic trailer brakes, 540/1000PTO, Cat. 2 rear linkage and pickup hitch. Serial ...