Used farm machinery in Cambridge for sale

To fit Manitou, 90' width

Twin hopper for grain and fert, fitted with narrow dutch coulters, tidy condition. C/w front wheel packer, narrow dutch coulters, and full with rear packer with following harrow. In very tidy order, just in with...

A very clean example! 1 owner. This is a well cared for, not hard-worked tractor with plenty of life left in it. Fitted with the 40kph Powerquad gearbox, 1000/540E/540 PTO, 3 double spools, pick up hitch, openin...

Runs nicely, c/w working dualpower! Starts, runs and drives well! Engine runs very nicely, but hours unknown as the clock as stopped. 2 Double spool valves, hydraulic trailer brakes, pick up hitch. Front tyres ...

A tidy example, goes well! A very straight example, with 2 double spools, hydraulic trailer brakes and pick up hitch. Starts, runs and goes very well! Unfortunately the 4WD prop shaft was removed by the previous...

C/w sprung axles and manual tailgate. Quite a straight trailer for its age! Serial Number: MS416102316

C/w 6 auto-reset legs, rear Multipacka A good example ready for work. New packer scrapers fitted. Serial Number: 12590

800mm barrel, 10ft wide Serial Number; B22211

C/w depth wheels, nice condition Serial Number: 2817K

C/w crosscutter knife, wavy discs and steel ring packer. in excellent condition, good metal throughout. Serial Number: 466

Ideal for moving muck or dirt as it is quite low sided, although currently fitted with extension sides. Tandem axle, rocking beam axles. Tyres are worn but sound. Floor getting thin.

In very nice order, 600mm barrel. Good tyres, great for transport. 2.45m transport width. 3050kg weight without ballast. With water ballast: 5280kg. Serial Number: 342263

In good order, c/w pulling bars

Tidy sledge with bright paintwork

C/w centre packer wheels at front, pre-emergence markers, Muller control box. Overall in tidy order with good metal. Serial number: 23471447

Hydraulic vari-width, rear discs Metal is good throughout, and is a straight plough overall. Serial number: 4918

3 cylinder Cat diesel engine! A very comfortable and powerful mower. Fitted with a 33.5hp diesel cat engine, 61' (1.55m) cutting deck, hydrostatic gearbox, fully independent suspension, twin fuel tanks and roll b...

In tidy condition, PTO drive, good hopper cover Fitted with E2 vanes and comes with a set of E6 vanes as well. Comes with Calibrator Icon box. Serial Number: 2970

To fit Manitou 2 cubic meter capacity. A couple of cracks starting to show at the back of the bucket as pictured. Serial no: 25682

Just in time for the show season! A tidy restoration that runs and drives well! Petrol Paraffin model and on very good tyres all round. Serial no:  BFC6034 / Engine no: FBKM249456 Drive: 2WD