Used farm machinery in Canterbury for sale

Bateson Welfare Trailer, 21ft4” Long x 7ft6” Wide, 7ft9” High (External size), Fast Tow, Restroom, Wet Room and Drying Room,

Ransomes Parkway 3 Gang Mower Year 2012, 2456hrs, 7ft Cut, c/w Full Cab with Air Con, Kubota Turbo Diesel Engine, Road Lights and Registered, Direct from Sports Club,

John Deere 1445 Out Front Mower 62" Deck, Hydrostatic Drive,

Morooka MK-160 S tracked tractor, 5096 hrs, 2 speed tracking, 600mm wide tracks, air con, 2.6m wide front blade with tilt and direction control, Perkins 6cyl engine,

Ifor Williams DP120S Livestock Trailer Year 2014, 12ft x 6ft, 3.5Ton Gross Weight, Twin Axle, Spare Wheel, 1 Partition, Sump in Floor, Nice Example, Had Very Little Use, In Excellent Condition.

Honda TRX 250 Year 2002 337hrs Electric gears Come direct from Small holding

Babini BEN LETAM dung grab, 2002, 1m wide, unsure on brackets but measure top hooks 540mm centre to centre, bottom tubes 720mm outside 560mm inside, toe tip frame, had very little use

Case international 485 tractor, 2x2, 1698hrs, PAS, c/w cab, new seat, Engine Overhauled, New Set of Rings and Head Overhaul, just been Serviced,  Ideal paddock tractor.

2005 KUHN GMD 700-G11 7 DISC MOUNTED HAY MOWER, 2.8 METRE WORKING WIDTH, HYDRAULIC FOLDING, SPARE BLADES, CAN BE SEEN WORKING

2005 KUHN GF 5001 MH DIGIDRIVE MOUTNTED 4 ROTOR HAY TEDDER, 5 METERE WORKING WIDTH, NO CRACKS OR WELDS, HAD AN EASY LIFE, CAN BE SEEN WORKING

Heavy Duty Water Filled Roll 5ft4” x 42” drum, 7ft2” Frame Width, 15mm Thick Drum, Direct from Sports Club, Heavy enough to do a good job,

Kubota B2150 Compact Tractor, 2x2, 3637hrs, PAS, c/w Hydrostatic Gearbox, Roll Bar, Grassland Wheels and Tyres,

Fleming TB5 transport box, 2015, 3pt linkage, 5ft wide, manual tip, had little use just sat outside,

The W-TL15 trailer has a capacity of 1,500kg and is fitted with a simple pin hitch for attaching to small or compact tractors. Comes with removeable drop sides.  Hydraulic Tip Requires 14 HP plus Internal Widt...

Ford 3910 Tractor, 2x2, 50 HP,  Year 1983, Genuine 1751hrs, PAS, Very original genuine tractor, engine serviced ready to work,

Perfect BG-150 Flail/Pulveriser Mower 1.5m cut Rear roller Brand-new set of flails and bolts Manual side shift Cat 1 and 2 linkage Year 2000

Toro Reel Master 5510 3660 hrs, Year 2008, 4 Cylinder Diesel,  2.5m Cut, with a cutting height range of 6.4mm to 25.4mm New bottom blades and has been sharpened, Rear Roller Brushes,  Ex golf course Serviced...

Three-point linkage Bale Spike Cat one and two linkage

McConnel woodworker sawbench, 3pt linkage, PTO driven, sliding top

Albutt 1300 shear grab, 2001, 1.3m wide, 0.6cu/m capacity, c/w Quicke brackets