Used Kuhn farm machinery in UK for sale

c/w hydraulic width adjustment, wide angle PTO & manual steering axle. St# B1147739

NEW 2025 HR 6042R power harrow, 6mtr working width, 460HP max power, 20 Spline PTO, Durakuhn blades, Maxipacker roller 535MM, Hyd working depth, Hyd levelling bar, track eradicators. -DUE IN!  

3D INTELLIWRAP WITH LASER AUTO LOADING.WILL WRAP AROUND SQUARE BALES.BALE COUNT 4362.ISOBUS. VREDESTEIN 19.0/45-17IMP Hours: 0

c/w set of S4 VXR & discs, 18-28m working width, 1⅜" 6 splines with one-way torque limiter, fertiliser identification guide, XL 1800 hopper extension, hopper cover, LED road lighting and signalling, disc guard, te...

c/w hammer knives, hydraulic sideshift, rear roller. The Kuhn VKM 280 is a 2.8-metre working width, rear mounted flail mower designed for shredding grass, pasture, fallow land, and pruning debris. It is known for...

EX DEMO Kuhn Venta 3030 Drill c/w 24 row Isobus, 1800L tank, half width shut-off and lights, pre emergence markers with Kuhn HR3030 Power Harrow c/w Durakuhn fastfit blades, mega packer roller, hydraulic working d...

Large Square Baler c/w Omnicut 80, easy flow lit, optifeed roller bale drop sensor electric bale length, automatic flywheel overload cam clutch, tandem axle hydraulic brakes, rear wheel steering, 500/60R22.5 tyres...

c/w remote rear door. St# A1149523

2022, Kuhn RW1610C trailed bale wrapper, Autoload, VT terminal, approx 7500 bale count.

2005 KUHN GMD 700-G11 7 DISC MOUNTED HAY MOWER, 2.8 METRE WORKING WIDTH, HYDRAULIC FOLDING, SPARE BLADES, CAN BE SEEN WORKING

2005 KUHN GF 5001 MH DIGIDRIVE MOUTNTED 4 ROTOR HAY TEDDER, 5 METERE WORKING WIDTH, NO CRACKS OR WELDS, HAD AN EASY LIFE, CAN BE SEEN WORKING

KUHN EL42-155, rotavator 60" working width, adjustable depth wheels, hasn't seen much work, and in good condition

XT OL 7ET, 7 BODIES, 18" CUTTING WIDTH, HYDRAULIC OFFSETT, WIDE HELICORDAL BODIES, DURAKARB POINTS, 1 X PAIR OF LANDSLIDE WEAR PLATES, ZXL SKIMMERS, 1200 X 500MM RUBBER WHEEL, TOOL BOX, LIGHTENING KIT, FURROW PRES...

Run up very well. Fitted with electrically control lift and ground pressure adjustment. Hydraulic offset adjustment. Plastic blade conditioner. Serial no: K0012

c/w 80mm standard share, levelling bales, mechanical roller adjustment, 600mm T-liner roller. The Kuhn Cultimer L300 is a 3-meter mounted stubble tine cultivator designed for shallow to deep stubble cultivation, ...

c/w hydraulic blower drive, visaflow monitoring & universal tramlining, 2 pair hard coated trac eradicators, pre emergence markers, CCI A3: Aux-N Isobus joystick with touch screen, continuous hydraulic working dis...

The Kuhn Haybob 300 is a 3-meter wide, dual-purpose mounted machine designed to ted and rake hay or low-stem green forage on small to medium farms. It acts as a versatile haymaker, providing fast tedding to spread...

c/w VT160 Isobus terminal with 9 pin in cab bracket, IMH power cable, lighting, 19.0/45x17 wheels The KUHN SW4014 is a hybrid bale wrapper that can wrap large square bales, 80x50-130 cm, up to 200 cm in length, a...

400mm diameter. For repair or conversion to 3m. One section has worn through in a couple of places - either wants repairing or cutting out to convert to a 3m packer.

KUHN VM153 PLOUGH, HYD OFF SET, 500MM PLAIN DISC,. DEPTH WHEEL, 6600 TRANS, AUTOMATIC BLOCK, HEADSTOCK, RACK. NOTE: AVAILABLE FROM THE FOLLOWING DEPOTS, ROSS-ON-WYE, MARTLEY, RAGLAN & BRIDGNORTH