Used Tillage Other for sale

KUHN PROLANDER 7500 7.5M TRAILER CULTIVATOR C/W VIBRATING TINES

22 inch plain rings In good order, ready to go. Tyres are perished but holding air.

In excellent order! Hydraulic packer, all in very nice condition. Runs well. Drive: 4WD

New discs, hydraulic reset cultivating legs, soil runner packer Serial Number: 638

7 LEG MACHINE. 2 LEGS IN WORKSHOP WILL COME WITH MACHINE. ON SPALDINGS METAL. POTENTIALLY A NEW TOWING EYE HAS BEEN BOLTED ON.

Accessorylist: CAT Engine Accessorylist2: 40MM Mesh 6M X 2M Drum Accessorylist3: Hydraulic Chassis Raiser Accessorylist4: Full Drum Cleaning Brush

Disc-tine-disc configuration. Fitted with ST tines and rear DD packer. This machine will need some TLC before going to work. Serial no: 120150105

CARRIER XL 625, UNBRAKED, ROAD TRAFFIC KIT, SYSTEM DISC AGGRESSIVE X-DISC PATTERN 610mm TRUCUT, DOUBLE STEEL RUNNER, DRAW BAR WITH HYDRAULIC PUSH ROD, 51mm BALL TOWING EYE, CROSS BOARD HEAVY, 560/45R22.5 WHEELS AN...

Fitted with rear drawbar. C/w track eradicators, rear levelling board and bar crumbler. Runs up very well. Serial no: 232

GPS forward speed and hydraulic fan. Fitted with track eradicators, 36 Sabre tine coulters at 166mm spacing, tramlining, bout and pre-em markers, depth wheel and double following harrow. Recording 3330 Ha worked....

Fitted with 22' plain rings. A nice, well cared for set of rolls. Fold and unfold well and ready to go to work. Serial no: 104710072

Fitted with rigid tine kit. In reasonable condition. Serial no: 96680080

C/w rear drawbar The discs are getting down but the machine is in good order. Bright paintwork, no welding good bearings and scrapers throughout. Manual gang angling. Serial no: 81889077

POWERARM 4.3M REACH, 3 POINT LINK, HYDRAULIC DRIVEN, 1M SUPERCUT FLAIL CUTTING HEAD

ALPEGO INVERSA STONE BURIER IZ300, C/W TURBO JET 8. I-CON 240L & FITTING KIT.

C/w scraper bar. 460mm dia, getting worn but still usable.

In good condition. 460mm Dia.

Disc - tine - disc configuration. Fitted with Pro-Active angle adjustable discs, 12 sprung ST tines and rear DDL packer.  Fitted with hydraulic brakes and rear drawbar. A good frame but needs attention before go...

C/w depth wheels Good strong frame. Depth wheel adjusters need freeing off and one is missing a handle. 4m transport width. Serial no: 1328

C/w depth wheels and crumbler roller Also has extra leg brackets to enable using it as a 4 leg machine.