Used Tillage Farm Machinery for Sale

C/w pre em markers and following harrow This drill was previously 're-worked' by Weaving Machinery and is in good condition throughout. Fitted with pre em and bout markers, and the wearing metal is ready for wor...

C/w leading tines Cast ring packer that folds to sub 3m for transport and manual fold tines. Also comes with an extended drawbar(not pictured) for use in a cultivation train. Serial no: 1135

C/w 13 shearbolt legs, mixing discs and rear crumbler Good strong frame, will go straight to work. Wear on the crumbler bars but still usable.

C/w a good quantity of different points. 4.5m machine fitted with tine extensions taking it to a 5.1m working width. 17 spung tines at 30cm spacing and rear following harrow. The machine has had its fair share of...

C/w leading tines, very good condition. A good press ready to work.

C/w new legs and points, leading discs and tooth packer In very tidy order, ready to work!

C/w depth wheels and leading discs Legs slightly out of line with each other due to a slight twist in the beam close to the nearside leg. Good metal

Outside legs can be adjusted out to suit up to 80' tramlines if required. 2.4m overall width. A strong but compact subsoiler which will work with some of the smaller horsepowers if needed. Done little work from n...

C/w good blades All free and ready to work!

C/w good wearing parts Hydraulics and cable lift system all working correctly. Fitted with trash knife. Serial No: MP220

Fitted with track eradicator tines. 2 rows of angle adjustable discs and rear DD packer. Plenty of life remaining on the discs and good tyres. Serial no: 113540044

Fitted with DDS bodies. C/w a full set of skimmers, manual vari-width and depth wheel. Serial no: 97MS3647

C/w 2 rows of tines Chain drive is not working so sold as is for spares or repair. Serial Number: K38328

Fitted with nearly new 450 discs. Comes with a cast ring packer. Straight enough machine but the paint is quite faded. 2.5m transport width. Serial no: 711

C/w 24' good plain rings Good straight condition, will go to work. 1 broken ring to be replaced before sale. Serial Number: 98349

On-land and in-furrow plough, c/w press arm. No.8 Long Helicoidal AR8HLM bodies, 90cm point to point clearance and shear bolt leg protection. Fitted with a lot of very good wearing metal, 10 out of the 12 boards ...

Qty 25 - 700mm cast rings. Comes with telescopic draw arms and 3pt linkage for transport. Will need a some TLC before going to work as a couple of the bearings have failed, a few broken spokes and the draw arms n...

C/w rear tooth packer 5 legs at 700mm spacing with shearbolt protection. Metal is reasonable, comes with some spare feet. Sound frame. Transport width: 3.6m

C/w depth wheels 7mm tine with angle and pressure adjustment, contouring frame and folds to a transport width of 3m. In good condition, tyre will be sorted before sale. Serial Number: 2757-14/06

Handy sized cultivator It needs a few points sorting and the depth wheels are incomplete/seized. But good straight frame and spring units.