Used Mowers for sale

Fitted with height adjustable wheels. 1000 speed PTO required. An older machine and runs up with a little vibration but would go to work. Fitted with hammer flails. 2.8m working width.

Hydraulic sideshift. Runs up very well and fitted with adjustable skids and 24 hammer flails. Heavy duty machine with rear roller and a 2.6m cutting width. Serial no: 82468

Looks to be in good order. In regular use until quite recently. Serial no 03LS07 Drive: 2WD

Kuhn 2.40m BPR240 Flail mower Front or Rear Mounted. Rear roller,Hydsraulic offset,Hammer flails,Floating blades. Cutting height control: Rollers,Year: 2018.

TEAGLE X-PRO 3.0M FLAIL MOWER, FRONT OR REAR MOUNTED REAR ROLLER, HYDRAULIC OFFSET, HAMMER FLAILS

Runs up well Serial Number: 3282

Dennis g860 in great condition. Fully serviced and reground in October and not been used since. Any questions please get in contact

Major 120000gr tractor mounted mower pro driven 3 decks All working, some surface paint has come off as you can see from photos Any questions please contact me

KVERNELAND 2628M DISC MOWER, SWATH BOARD RH, FLEXIBLE. SUSPENSION, ADJUSTABLE LIFTING PINS, NONSTOP BREAKBACK. NOTE: AVAILABLE FROM THE FOLLOWING DEPOTS, ROSS-ON-WYE, MARTLEY, RAGLAN & BRIDGNORTH

Manual slew behind for transport. A nice basic little mower with a 1.85m working width. Serial no: 00968

MCCONNEL PA5562 HEDGECUTTER, ERC MOTION CONTROLS, 1.2 HEAD. STD ROLLR, LFT/ANGLE FLOAT, OIL.

Kverneland 3332MT Rear Mounted 3.20m Mower condition,Folding. Steel conditioner,Year: 2023.

1.2m head with T-flails - runs well! Fitted with telescopic arm, hydraulic slew behind, hydraulic break-back protection, oil cooler and electric joystick controls. Also includes an A-frame stabiliser.

Runs up perfectly! An older hedgecutter but been very well cared for and runs up flawlessly. Comes with a 1.2m direct-drive head with T-flails and fixed rear roller, parallel arm geometry, hydraulic slew behind a...

Kuhn FC244D-FF Rear Mounted 2.40m Mower,Hydraulic folding. Steel tine conditioner,Year: 2021.

C/w 1.2m head. Fitted with joystick cable controls, fully independent hydraulics and hydraulic breakback protection. The head is fitted with T flails and fixed rear roller and runs up reasonably well but has a sl...

Heavy duty swinging blades. Runs up well and fitted with height adjustable skids. Serial no: 116 Drive: 2WD

Fitted with new hammer flails. A tidy and useful flail. Fitted with new flails and comes with a rear roller. The belt cover will be fitted and the rotor will be balanced before delivery. Serial no: MM91D0264

C/w hydraulic sideshift Front or rear mount, rear roller and C flails. Runs very well! Serial no: S125600

Hydraulic offset. Fitted with hammer flails and rear roller. Runs well. Serial no: 102915