Used Forage And Hay Other for sale

To fit JCB Good pipes, fitted with 1 side rail, in good order. JCB brackets just fitted by previous owner.

In very good order c/w chute Been used behind a Welgar AP630 baler (also for sale on our website) Good tyres, all functioning correctly.

EXCELLENT CONDITION, SHOWROOM NEW, only 30 hours work completed SPECIAL EDITION flat top deck (ridiculously easy to clean) FULLY MAINTAINED and ready to go

2013, Pottinger Novacat X8 Tripple/ Butterfly Mower Conditioners, 8.3mtr wide, ex farm condition, Does need new pto guards.

2017, John Deere 331 rear mower conditioner, 3 point linkage mounted, 1000rpm, does need new set of blades.

2023, John Deere R950R rear butterfly mower conditioners, rear three point linkage mounted, Quick knives, 6 spline 1000 rpm. **Videos of mowers working available on request**

Teagle tomahawk 5050 For silage/straw Round bale shredder Been barn stored

Vicon Fanex Rotary Tedder Model: Fanex 524 Type: VF6597 Weight: 520 kg Year: 2016

Claas Volto 900 Tedder Type: 54 Year: 2015 Weight: 1240 kg

2020 KRONE KW 5.52/4x7 Tedder - Manufactured 2020 - Working width: 5.5m - Four rotors. Seven arms per rotor - Manual border spreading control - Roadlights - 540 PTO - In nice order - Price: £5,750

Angle and height adjustable wheels. Runs up well and folds to sub 3m for transport. It has had some strenghtening on the headstock and a few small welds as pictured. Serial no: SN11385

John Deere V451M baler, Build 2021, Sold August 2023, 612 bales, BaleTrak box, 2.2mtr Premium pick up, MaxiCut 13 Chopper/knives, PickUp roll compressor, 500/50-17 wheels, road lights, ramp discharge. ** Advert...

KUHN GF502 TEDDER, PTO. NOTE: AVAILABLE FROM THE FOLLOWING DEPOTS ROSS-ON-WYE, MARTLEY, RAGLAN AND BRIDGNORTH

NEW 2026 4.2mtr single rotor rake, pivoting headstock, 30HP requirement. ** DUE IN **

KVERNELAND 8576 TEDDER, ISO VERSION, BORDER TEDDING, 7.6M. WORKING WIDTH, 6 ROTORS PROLINE, EUROPEAN EXECUTION PRO. NOTE: AVAILABLE FROM THE FOLLOWING DEPOTS ROSS-ON-WYE, MARTLEY, RAGLAN & BRIDGNORTH

Rows up or spreads out. Has had some welding but seems to run up ok.

JCB narrow fit brackets Average condition but would go to work! Serial no: BL61-9204/1

KUHN GF6503 TEDDER, PTO, HYD OFFSET.

Claas VOLTO 900 Mounted 8.70m Tedder,8 Rotors. 6 Tine arms per rotor,Year: 2022.

2017 variable round baler, 13 knife chopper, central greasing bank, 500/55R20 tyres, angled hitch with ball joint, 1000rpm 6 spline shaft, b wrap tying system, 36518 bale count. ISOBUS.