Used Plant machinery in Yorkshire and the Humber for sale

Excellent condition, done very little work, only sold due to loss of contract. Stock Code (CP3603) Date of First Registration 15.02.2017 2 Owners From New, Twin Front Brushes + Central Suction Nozzle, Enclosed cab...

(GH1488) New in stock, machine has been very well looked after and serviced regular. Only sold due to lack of usage hence the low hours. Model Year 2015, ONLY 2,865 Hours, JCB TA4 4 Cylinder 109hp Turbo Engine, Ai...

Waste spec, Solids, Starts and Runs OK, Bottom arm pins/bosses worn to excess, few error codes relating to wiring around the Engine. Selling "As Is" Transmission OK.

Weigh loader, excellent tyres, extra hydraulics, all in very good working order. Various buckets available upon request.

Long Boom, Joystick controls (Servo levers can be fitted if preferred at no extra cost) extra rear logging weight/ballast, Boom suspension, Greasing system, reversing camera, extra hydraulics, Volvo serviced from...

Choice of 2: 2013 Dromore Forks @ £950 + Vat Strickland Forks @ £1,250 + Vat Both are adjustable size from 65mm - 80mm pins Excellent Condition

Hydraulic Rotating Selector Grab Manufactured by RSL Engineering Excellent Condition

JCB Genuine Fits on any machine with pallet forks & 3rd Service Ideal for Teleporters Sweeper and Collector

JCB JS13 TONNE EXAVATOR 098696 HOURS PRICE: £10,500 + VAT IF NOT FOR EXPORT

Traded in from a local family builder. Only sold due to upgrading to a larger machine. Well maintained and in excellent order for its age. Stock Code (CP3589)Model Year 2000, Perkins 4 Cylinder Engine, 4x4, Forwar...

(CP3632) Direct from local builder. Only used on a private site. A fantastic and versatile to operate. Model Year 2016, Clock Reads 2,596 Hours, Kubota 4 Cylinder Engine, 4x4, Forward/Reverse Switch, Hydrostatic G...

Direct from local housing developer, only done light site work. Service and tested regularly on a strict maintenance plan .Stock Code (CP3626)Year of Registration 01.02.2020, Year Of Manufacture 2019, Clock Reads ...

Choice of 3 @ £950 + Vat Each Conquip Pallet Forks 65mm Pins Fit most 13T Machines

Come off a JCB 2CX Compressor Ideal hand tool for use off a compressor Good Working Order

Come off a JCB 3CX Full set of Cab Guards Complete with Cage

Come off a JCB 2CX Streetmaster Fits a wide range of midi excavators Full Working Order

65mm Pins Pin Center to Pin Center 450mm (Can be adjusted back to 340mm) 2ft Digging Bucket in the Center 3.8m Overall Width

Come off CAT 308E Will fit other 6-8 Ton Machines 50mm Pins 305mm Front Pin to Back Pin Center Dipper End Width 255mm Good Working Order

Fits JCB Roto machines As new condition - never been used JCB Genuine

Manitou Brackets Year 2020 Truss jib which manually extends out for longer reach Heavy Duty Done Very Little Work - Excellent Condition