Used farm machinery in Newmarket for sale

Around 50% tread remaining Currently fitted to split rings and ballasted.

Good metal, c/w skims Serial number 9330

C/w Raptor tines, tungsten points & hydraulic levelling paddles A very good heavy press, with excellent metal. Serial Number: 271

C/w reset tines, mixing discs and steel ring packer In very nice order, a very good cultivator with hydraulic depth control using the front depth wheels and rear packer. Serial Number: CX0003449

C/w Terragrip auto reset tines, DD Lite packers, depth wheels. Packers need attention and frame has had welding repairs. Ex-farm condition. Serial Number: 34182209

40kph, 3 spools, pick up hitch and front weights. A smart looking tractor, now recording 8740 hours. Fitted with air conditioning too. Perkins 4 cylinder engine, 40kph powershift gearbox with 4 speeds in 4 range...

Electric controls, hydraulic roller, telescopic reach, runs very well! This is a very nice hedgecutter, with good spec. Comes with its A Frame. Serial Number: S92719

C/w skims and rear discs Good straight plough Serial Number: 97MA3633

Quantron-E control, weigh cells and hydraulic border spreading PTO drive, manual hopper cover, currently fitted with S6 VXR discs. A nice spec spreader overall, some rust around the body but not too bad overall. ...

Single ram tip Needs new floor, so sold as is, but a good base for a project or fix!

C/w rear linkage & PTO, and tipping pipe Good little tractor, based on the Massey Ferguson 240 tractor and uses many of the same parts. Runs and drives well. Serial Number: 00215

C/w hydraulic side shift, rear roller Hammer flails are serviceable, but getting worn. Serial Number: 035

800mm diameter c/w scraper kit & bearings. Done very little work.

With brackets to fit a Case MXU 135 Comes with dolly wheels, rubber cutting edge and hydraulic lift. Looks to me missing an angling ram. Serial no: 64477

C/w slatted bodies Fitted with manual vari-width adjustment, auto-reset, depth wheel and fitted with new points and skim bodies throughout. In good order! Serial no: 334 396

In very good condition. Comes with bolt on cutting edge. 0.36m³ Capacity. Serial no: 9333 0122 0032

3 point linkage mounted

C/w pre-em and bout markers, and front levelling board In reasonable order with wheel track eradicators and good metal. Electric drive. Isobus control. Serial Number: 63625 Drive: 2WD

Useful low sided trailer for soil, muck or logs Low sides make it ideal for loading with a digger or smaller loader tractor. Top of sides are 1.5m from ground. No brakes or lights, some rust on body as pictured,...

C/w hydraulic tailgate and sprung axles. In good order for the age, c/w grain chute and hydraulic brakes. Serial Number: A937