Used farm machinery in Newmarket for sale

C/w Bolt-on Euro brackets and removable rollers. Two forged steel 1200mm tines.

Front linkage and PTO, very high spec with JD 683R loader An exceptionally clean and tidy example with just 4,360 hours. Fitted with the 50kph AutoPowr transmission, front linkage and PTO, 1 front ESCV and high f...

Fitted with 6 auto-reset subsoiling legs. In very good condition and fitted with new Concord legs, shins, points and wings. Good discs and bearings through out and rear Multipacka. 3m transport width. Serial no:...

Straight booms, good tyres, hydraulic braked axle, 4500 litre. Not in test, but all seems in good working order. Serial Number: 1010174

Around 50% tread remaining Currently fitted to split rings and ballasted.

C/w no.28 bodies, tungsten points, manual vari-width Serial number 9330

C/w Raptor tines, tungsten points & hydraulic levelling paddles A very good heavy press, with excellent metal. Serial Number: 271

C/w reset tines, mixing discs and steel ring packer In very nice order, a very good cultivator with hydraulic depth control using the front depth wheels and rear packer. Serial Number: CX0003449

C/w Terragrip auto reset tines, DD Lite packers, depth wheels. Packers need attention and frame has had welding repairs. Ex-farm condition. Serial Number: 34182209

40kph, 3 spools, pick up hitch and front weights. A smart looking tractor, now recording 8740 hours. Fitted with air conditioning too. Perkins 4 cylinder engine, 40kph powershift gearbox with 4 speeds in 4 range...

Electric controls, hydraulic roller, telescopic reach, runs very well! This is a very nice hedgecutter, with good spec. Comes with its A Frame. Serial Number: S92719

C/w skims and rear discs Good straight plough Serial Number: 97MA3633

Quantron-E control, weigh cells and hydraulic border spreading PTO drive, manual hopper cover, currently fitted with S6 VXR discs. A nice spec spreader overall, some rust around the body but not too bad overall. ...

Single ram tip Needs new floor, so sold as is, but a good base for a project or fix!

C/w rear linkage & PTO, and tipping pipe Good little tractor, based on the Massey Ferguson 240 tractor and uses many of the same parts. Runs and drives well. Serial Number: 00215

C/w hydraulic side shift, rear roller Hammer flails are serviceable, but getting worn. Serial Number: 035

800mm diameter c/w scraper kit & bearings. Done very little work.

With brackets to fit a Case MXU 135 Comes with dolly wheels, rubber cutting edge and hydraulic lift. Looks to me missing an angling ram. Serial no: 64477

C/w slatted bodies Fitted with manual vari-width adjustment, auto-reset, depth wheel and fitted with new points and skim bodies throughout. In good order! Serial no: 334 396

In very good condition. Comes with bolt on cutting edge. 0.36m³ Capacity. Serial no: 9333 0122 0032