Used Miscellaneous farm machinery in Kent for sale

Babini BEN LETAM dung grab, 2002, 1m wide, unsure on brackets but measure top hooks 540mm centre to centre, bottom tubes 720mm outside 560mm inside, toe tip frame, had very little use

Heavy Duty Water Filled Roll 5ft4” x 42” drum, 7ft2” Frame Width, 15mm Thick Drum, Direct from Sports Club, Heavy enough to do a good job,

Three-point linkage Bale Spike Cat one and two linkage

Manual Fold Chain Harrow 4.4m Wide Frame (14.5ft) Good condition mat Cat 1 or 2 linkage

Carterhouse 9738/1 rear forklift, 3pt linkage, hyd. lift, 1ton capacity (dependant on weight of tractor), 6ft lift height with wheels on ground,

Trima +3.0p Power Loader with Joystick Control, (Loader Only) Euro and Trima Headstock, Complete with Brackets Came off 2007 95HP 4wd Tractor as per photos.

Trench Back Filling Trailer PTO Driven, Wide Flotation Wheels and Tyres, Side Discharge with Guiding Shoot,

Keener Super 9-18.4R38 Tyre Radial, Few Light Cuts On Side Wall ***

Wooden Tipping Trailer, 11ft x 6ft6” (External) Body, 22” Dropsides, 12.5/80-15.3 Tyres, Metal Floor, Removable Tailgate, Wind Down Jack,

Ring roll 7ft 4 working width, Pin Hitch

Humus LV 110 rotary mulcher Year 2017 Cat 1 linkage 540 PTO Hydraulic adjustable working width of 1.10m to 1.38 Overall width of 1.16m to 1.44m Min of 40 HP Made for vineyard and Orchard mulching

Danuser F-8 post hole borer, 3pt linkage, PTO driven, c/w 12” auger,

Trailer Engineering 1125 litre Skidbase Water Bowser, Year 2020, Galvanised Frame, Plastic Tank, Empty weight 120kg, 2.3m x 1.22m, 1m high, Ideal For Fork Lift, Can be moved around or loaded onto trailer.

Pair of grassland front wheels and tyres, 300/80-15.3 (11.5/80-15.3), 6 stud wheels, trelleborg tyres, ref no: FG1

Pair of 13.0/65-18 trailer wheels and tyres, 6stud, 1x mitas as new tyre, 1x alliance tyre with light perishing,

Enduramaxx 12 volt sprayer, 150 litre tank, 3m folding boom, hand lance, 3pt linkage, or can be mounted in utility vehicle or trailer

Ring roll, approx 7ft6” rolling width, 9ft4” frame width

3pt linkage pallet forks, cat 1 linkage

Pigtail Cultivator, 4ft6” Working Width, 3pt Linkage, 17 Tines, Ref No: PT2.

Pigtail Cultivator, 1m75 Working Width, (5.75ft) 2m20 Frame Width (7ft2"), 3pt Linkage, 13 Tines, Ref No: PT1