Used farm machinery in Sudbury for sale

C/w pre em markers and following harrow This drill was previously 're-worked' by Weaving Machinery and is in good condition throughout. Fitted with pre em and bout markers, and the wearing metal is ready for wor...

90% tread remaining on tyres. Wheels fitted with adjustable centers. Please see photos for fitment sizes.

C/w JD Starfire 6000 dome and screen. Runs and drives well. Currently recording 8133 hours and good for many more. 290hp engine with a 16 speed full powershift gearbox, Full set of front wafer weights and front i...

C/w leading tines Cast ring packer that folds to sub 3m for transport and manual fold tines. Also comes with an extended drawbar(not pictured) for use in a cultivation train. Serial no: 1135

C/w rowcrop and flotation wheels, tidy sprayer! Genuine reason for sale due to retirement, this is in good order all round. Showing 6854 hours. Rowcrop wheels are 320/85R32. Serial Number: 97076 Drive: 4WD

C/w 13 shearbolt legs, mixing discs and rear crumbler Good strong frame, will go straight to work. Wear on the crumbler bars but still usable.

C/w a good quantity of different points. 4.5m machine fitted with tine extensions taking it to a 5.1m working width. 17 spung tines at 30cm spacing and rear following harrow. The machine has had its fair share of...

C/w leading tines, very good condition. A good press ready to work.

6 row, pto drive c/w markers.

1.2m head with T-flails and hydraulic roller. 6.5m reach - in tidy order and runs up well. C/w hydraulic proportional controls, telescopic arm, head and arm float, hydraulic breakback protection and A-frame stabi...

C/w new legs and points, leading discs and tooth packer In very tidy order, ready to work!

C/w depth wheels and leading discs Legs slightly out of line with each other due to a slight twist in the beam close to the nearside leg. Good metal

Linkage mounted, c/w pto shaft

Outside legs can be adjusted out to suit up to 80' tramlines if required. 2.4m overall width. A strong but compact subsoiler which will work with some of the smaller horsepowers if needed. Done little work from n...

C/w good blades All free and ready to work!

C/w good wearing parts Hydraulics and cable lift system all working correctly. Fitted with trash knife. Serial No: MP220

Fitted with track eradicator tines. 2 rows of angle adjustable discs and rear DD packer. Plenty of life remaining on the discs and good tyres. Serial no: 113540044

Fitted with DDS bodies. C/w a full set of skimmers, manual vari-width and depth wheel. Serial no: 97MS3647

C/w 2 rows of tines Chain drive is not working so sold as is for spares or repair. Serial Number: K38328

Fitted with nearly new 450 discs. Comes with a cast ring packer. Straight enough machine but the paint is quite faded. 2.5m transport width. Serial no: 711