Autotrader plant

Skip to contentSkip to footer

Used Plant machinery in Royston for sale

With 42 used machines in Royston available on Auto Trader, we have a fantastic range of plant equipment for sale across the UK.

Latest Plant machinery in Royston for sale

View morechevron-right
  • £4,950 +VAT

    In tidy condition, runs up well. 3400l capacity and fitted with a MEC8000 Vacuum pump. Comes with various lengths of pipe and splash plate. Hydraulic brakes and very good super single tyres. Serial no: DS2255

  • £21,750 +VAT

    Only 4,606 hours! Just in from a small arable farm in the Fens. In very good condition throughout and fitted with a 108hp Perkins engine, 40kph 2 speed hydrostatic gearbox, hydraulic pickup hitch, 3rd service and...

  • £8,250 +VAT

    On good rubber tracks. Recording 2685 hours and in reasonable condition for the age. Some wear in the kingpin and in various pins and bushes but nother stopping it going to work. Piped for a breaker or other atta...

  • £28,750 +VAT

    A powerful ag spec handler. C/w 142hp engine with a 40kph 6 speed powershift transmission. In tidy condition throughout and is fitted with a pin and cone headstock with hydraulic locking and 3rd service, hydrauli...

  • £16,500 +VAT

    SMART ARTICULATED LOADERS - POWERED BY KUBOTA Built for Strength. Engineered for Precision. Kubota-Powered Performance - Trusted Japanese engineering ensures unbeatable reliability and fuel efficiency. Lift Rate...

  • Hitachi

    2019

    £42,000 +VAT

    Hitachi 20 tonne excavator excellent condition, low hours, 3 buckets.

  • £8,000 +VAT

    Detroit 6-71 2-Stroke Diesel! A classic crawler that may well have seen action in World War 2. Fitted with hydraulics and rear drawbar. Serial no: 3571

  • £19,950 +VAT

    Folding ROPS, flashing beacon, green beacon, reverse alarm, site lights, very good condition. Straight chassis and bonnet with no damage, very good paintwork, 218 hours. Kubota D1703 diesel engine with US EPA sta...

  • £3,750 +VAT

    6 cylinder Ford engine. Good trackwork, the engine is free and has been running however will need some TLC to put it back to work. Rear linkage is incomplete. Serial no: 1261801

  • £1,450 +VAT

    To fit 10 - 18t excavator. Comes with weld-on dipper pad. To suit a quickhitch with the following dimensions: 60mm Pin dia, 370mm Center to Center and 270mm dipper gap. The overall width of the grab is 1250mm.

  • £3,950 +VAT

    C/w hydraulic high tip, pto driven brush. 1.2m working width. In good order. Serial Number: K-SC17327