Autotrader farm

Skip to contentSkip to footer

Used Bomford for Sale

Bomford has been at the heart of the engineering and agricultural industries since the late 1800s. Regarded as a leader in the field of innovative farm machinery, the company is known for making products that offer exceptional value for money and will provide many years of service. You can view the latest range of used Bomford farm machinery from arm mowers and flail mowers to toppers and forestry mulchers online now, right here on the Auto Trader Farm website.

Latest Bomford for Sale

View morechevron-right
  • £9,950

    2022 3.4mtr hedgecutter, 1mtr head, parallel linkage, Electronic Proportional Controlled (EPC) controls, rotor reverse. ** Tractor unit not included **

  • POA +VAT

    USED 2.5M BOMFORD FLAIL TOPPER HYDRAULIC OFFSET RUBBER FLAP REAR ROLLER

  • £10,750 +VAT

    In very good condition - cable controls. Fitted with a 1.2m Pro-Trim head with T-flails and rear roller, linkage mounted with A-frame support, hydraulic brake-back protection and LED lights. Arm serial no: B1510...

  • £5,200 +VAT

    Bomford Turner 2.25m TURBO Flail mower Rear Mounted. Rear roller,Hydsraulic offset,Year: 2020.

  • £1,250 +VAT

    C/w Flexi-Coil packer Useful tramline buster or strong 8ft frame to adapt. 100mm box frame. Subsoiling legs set at 5ft / 152cm. Transport width: 2.6m

  • £875 +VAT

    Fitted with 9 legs. Good strong cultivator, 100mm box.

  • £17,750

    2022, 285hrs, 5.7m reach fit w/ 1.2m Pro Trimflail head. ICS 4 fully propor-tional controls, electric head float, 3 point linkage frame, LED lights and auto oil cooler.Added rear arm guards.

  • £25,600 +VAT

    New Machine 7m Power Plus hedgecutter ICS controlled In stock now Year of Manufacture: 2024 Additional Features: Electric arm/head float 1200 Pro trim head Stocklist Number: 30114527

  • £2,900 +VAT

    Ex-Demo Machine Hedgecutter with a 3.5m reach Min hp required - 15hp 201kg Year of Manufacture: 2022 Additional Features: Please note that our ex-demo and ex-hire machines will remain in service until sold and a...

  • £28,000 +VAT

    New Machine 7m hedgecutter ICS controlled In stock now Year of Manufacture: 2024 Additional Features: Electric arm/head float 1200 Pro trim head Stocklist Number: 30114529

  • £16,500 +VAT

    Fitted with 1.5m head. A high spec machine. Comes with ICS controls with electronic rotor reverse, bracket mounted machine, telescopic and VFR arm and fitted with a 1.5m head with good 60mm match cut flails and 1...

  • £18,950

    2020 5.7mtr hedgecutter, 1.2mtr head, 3pt linkage mounted, EPP electric controls, Very Little Use!

  • £5,950 +VAT

    Bracket mounted, joystick control. Arm all operates well and rotor runs ok. The front guard on the head is a bit loose however. A lot of machine for the money!

  • £17,150 +VAT

    Bomford Turner FALCON EVO Hedgecutter 1.50m,Belt drive head. T FLAIL,6.0m arm reach,Rear mounted. Totally independent hydraulics. Electric joystick controls controls,Telescopic arm,Powerslew. Parallel arm,3 point ...

  • £4,995 +VAT

    Variable Height of Cut 25mm-333mm (1-10"), Power Requirement 90HP,  Cutting Width 2.7M / 9FT,  Transport Width 3M / 9.10FT, Slip Clutch Protection for PTO Shaft. This Bomford Triblade 3000 has direct driven b...

  • £1,750 +VAT

    2.75mtr cutting width. Skids are worn but blades are serviceable and it does run up really well! Serial Number: 2174T

  • £19,950

    2021 6.5mtr hedgecutter, telescopic arm, 3pt linkage, 1782hrs ICS control, 1.5mtr head, electric head/arm float.